Double cone rotary vacuum dryer using the environment should pay attention to explosion - proof,
corrosion and moisture double cone rotary vacuum dryer should be in the relative humidity ≤ 85%RH, no corrosion vacuum dryer gas, without the use of strong vibration source and strong magnetic field environment. Double cone rotary vacuum dryer items such as damp, between the vacuum box and the vacuum pump are best added filter, preventing damp gas into the vacuum pump, vacuum pump failure caused by.
Double cone rotary vacuum dryer Studio No explosion-proof, anti-corrosion treatment, not double cone rotary vacuum dryer placed Yi Ran, explosive, corrosive gas produced goods.
Vacuum pump can not long time work, so when the vacuum degree reaches double cone rotary vacuum dryer items required, first close the vacuum valve, then close the vacuum pump power, the vacuum degree is less than double cone rotary vacuum dryer items required, and then open the vacuum valve and vacuum pump power, continue to vacuum, which can prolong the service life vacuum pump.
Double cone rotary vacuum dryer items such as the double cone rotary vacuum dryer after the change of light weight, small size (small particles), should be in the studio vacuum plus blocking net, to prevent double cone rotary vacuum dryer fabric suction and damage the vacuum pump (or solenoid valve).
Double cone rotary vacuum dryer is used many times, can not be vacuum phenomenon, this time should replace the seal on the door or the adjustment on the box door out of distance to solve.
Really empty double cone rotary vacuum dryer temperature is higher than 200 ℃, will have a slow leak phenomenon at this time open the box double cone rotary vacuum dryer behind cover with inner six angle wrench to loosen the heater base, replace the sealing ring and tighten the heater base to solve. The bleeder valve plug rotation, if difficult, can be coated with an appropriate amount of grease lubrication. (such as Vaseline) in addition to repair, can not open the box cover on the left so as not to damage the electrical control system.
Double cone rotary vacuum dryer machine should be kept clean. Chemical solution tank door glass avoid using a reaction to wipe, application of soft cotton cloth to wipe. If no vacuum double cone rotary vacuum dryer machine, electroplating pieces eraser will dew outside the net coat of neutral oil, to prevent corrosion, and sets of plastic film cover, placed in a double cone rotary vacuum dryer interior, so as to avoid electrical components from damage, affect the use.
|
