Dry granulating machine operation method:
The use of dry granulating machine before the first check whether the fastening screws parts.
Before starting the pressing wheel on both ends of the two regulating screw loosening, and then start the motor, observe whether the same dry granulator transmission and identification.
When the operator to complete the granulating a day's work, in the granulation interior materials into finished, oil (raw material and 10% waste oil mixed) adding machine fill die mold to ensure the die hole can not be blocked, so that the operator will be ready for the next operation, the next time you start dry granulating machine will save a lot of time.
Raw material: material moisture content should be adjusted to 14%-18%, the moisture content is too high or too low will affect the yield and quality of grain; at the same time raw materials should be mixed evenly, uniform water.
Dry granulating machine use, first stop feeding before shutdown, the materials in the storage bin is processed, adding oil material is pressed into the template hole, holding hole smooth, to prepare for the next use clogging phenomenon can not occur.
Roller bearing in the normal production circumstances, five days must use gasoline or diesel cleaning time, injection speed gear lubricating oil at the same time, the first half of repair and maintenance time, cleaning shaft bearing a 7 day.
Particle treatment: granular temperature process is relatively high, should be placed in ventilated place to cool to room temperature before bagging storage.
Dry granulating machine matters needing attention:
1, dry granulator operating personnel should read this manual, familiar with the performance of dry granulator, structure and operation methods, and installation in accordance with the regulations, the use of maintenance.
Should remove hard debris 2, feed, so as not to damage the dry granulating machine. |
